Connecting to EGRPS Wireless: Windows 7


Connect Using WPA2-Enterprise with Windows 7

  1. From the Start menu, select Control Panel.

  2. Click Network and Internet, then select Network and Sharing Center. (If you are viewing the Control Panel using icons, you can select Network and Sharing Center directly.)

  3. Select Manage wireless networks in the left menu.

  4. Click the Add button, and select Manually create a network profile.

  5. Enter following data, as shown in the image below, then click Next:

    • Network name: EGRPSWireless
    • Security type: WPA2-Enterprise
    • Encryption type: AES
    • Security Key/Passphrase:
    • To automatically select EGRPSWireless whenever it is available, check Start this connection automatically:

             

  6. You will see a window that says Successfully added EGRPSWireless (shown below). Do not close this window yet. Click Change connection settings:

  7. In the EGRPSWireless Wireless Network Properties window (shown below), select the Security tab:

    EGRPS Wireless Network Properties window - Windows 7
  8. In the drop-down menu for Choose a network authentication method, select Microsoft: Protected EAP (PEAP).

  9. If you do not wish to enter your password each time you connect, check the box next to Remember my credentials for this connection each time I'm logged on.

  10. Click the Settings button next to the Microsoft: Protected EAP (PEAP) drop-down box.

  11. In the Protected EAP Properties window (shown below), uncheck the Validate server certificate box.

    Protected EAP window - Windows 7

     

  12. Make sure the box next to Enable Fast Reconnect is checked.

  13. Under Select Authentication Method, select Secured password (EAP-MSCHAP v2), and click the Configure... button.

  14. Uncheck Automatically use my Windows logon name and password (and domain if any), and click OK:

    EAP MSCHAPv2 Properties

  15. Click OK, to close the Protected EAP Properties window, and return to the EGRPSWireless Wireless Network Properties window.

  16. Click the Advanced settings button.

  17. In the 802.1X settings tab, check the box next to Specify authentication mode and select User authentication from the drop-down menu:

    Advanced settings

  18. Click OK to close the Advanced settings window, and click OK again to close the EGRPSWireless Wireless Network Properties window
  19. If you are in range of a EGRPSWireless access point, you will be automatically prompted to Enter/select additional logon information:

    Connect to a Network
  20. When prompted for Network Authentication, enter the following data:
    • User name: <your EGRPS uniqname>
    • Password: <your EGRPS password>
  21. Click OK.

You should now be connected to EGRPSWireless.

Troubleshooting Tips

  • It may be necessary to turn your WiFi connection off and back on in order to connect the first time.

  • Make sure you have installed all available driver updates and patches for Windows and your wireless device (check the wireless card manufacturer's website for the most current driver updates).

  • If you still have trouble connecting to EGRPSWireless, please stop by the Learning Commons to see a technician